Lucent Technologies SYSTEM 85 Server User Manual


 
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 7400 Series Voice Terminals
11-52The 7406D, 7406BIS, and 7406 Plus Voice Terminals
11
Power Requirements
The 7406D, 7406BIS, and 7406 Plus voice terminals receive power from the
system and do not require any external power supply. Additional power is required
when these voice terminals are equipped with any adjuncts or the Z703AL1 data
stand. Refer to the Adjunct Power section earlier in this manual.
Switch Administration
Aliasing
The 7406 voice terminals must be aliased in the following way:
CAVEATS:
For System 75, R1V1 and System 85, R1V2, V3, and V4, the following caveats
apply:
7406D02A, 7406D04A, 7406D06A, 7406D08A aliased as 7405D;
7406D02A, 7406D04A, 7406D06A, 7406D08A w/7400B Data Module
aliased as 7405 w/ Data Module;
7406D01A, 7406D03A, 7406D05A, 7406D07A aliased as 7405D w/Digital
Display Module;
7406D01A, 7406D03A, 7406D05A, 7406D07A w/7400B Data Module
aliased as 7405D w/Data Module and Digital Display Module;
Table 11-10. Administering the 7406D, 7406BIS, and 7406 Plus Voice Terminals
If you are administering
this system:
For this type of
voice terminal:
The voice terminal must
be administered as:
System 75, R1V1
System 85, R2V1, V2, V3
7406D
7406BIS
7406 Plus
a 7405D voice terminal
(See CAVEATS below)
System 75, R1V2 or above
DEFINITY G1 and G3, and
DEFINITY ECS
System 85, R2V4 or above
DEFINITY G2
7406D
7406BIS
itself
System 75, R1V2 or above
DEFINITY G1 and G3, the
DEFINITY ECS
System 85, R2V4 or above
DEFINITY G2
7406 Plus a 7406D voice terminal
or
7406BIS voice terminal