DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 7400 Series Voice Terminals
11-69The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals
11
DIP Switch Options for the 7407 Plus
For the 7407 Plus (7407D02D) voice terminal, the 3-position DIP switch should be
set in the following way:
■ Initially, Switch 1 is set to the OFF position. However, according to the
release and version of the System 75 or 85 to which the voice terminal is
connected, you may need to change Switch 1 to the ON position. Check
the following table for this information.
NOTE:
If this switch is not set correctly, the display will not work properly. For
example, the call appearance display, usually on the top line, may appear on
the second line instead.
■ Switch 2 is set for the Speakerphone feature (to the OFF position). If the
voice terminal is to be set for the Speaker (listen-only) feature, set Switch 2
to the ON position.
NOTE:
In order to allow the system to recognize this change in the setting,
you must disconnect the voice terminal and then plug it in again.
■ Switch 3, on the 7407 Plus voice terminal, is not to be used at this time.
Table 11-12. DIP Switch Settings on the 7407 Plus Voice Terminal
If the voice terminal is connected to: Set Switch 1 to:
System Release Version Switch Setting
System 75 1 1 On
System 75 1 2 and above Off
System 85 1 All On
System 85 2 1 On
System 85 2 2 and above Off
DEFINITY Generic 1 Off
DEFINITY Generic 2 Off