Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
Cordless and Wireless Telephones
18-20The MDW 9000 Wireless Telephone
18
■ If your phone system uses an uninterruptible power supply, such as a
backup generator, be sure to connect the radio or radio base station to that
power supply.
Switch Administration
Aliasing
For all System 75 and System 85 releases and DEFINITY Generic 1, Generic 2,
and Generic 3, Versions 1 and 2, the MDW 9000 terminal must be administered
as a 7303S Hybrid terminal.
If your MDW 9000 is connected to a DEFINITY Generic 3, Version 3 (or later), the
MDW 9000 can be administered as itself.
For the System 85, R2V1 through R2V4 switch which does not accommodate
Universal modules, an ANN17B Hybrid pack in conjunction with a DS-1 carrier
must be used to connect the switch and the MDW 9000 terminal. On all other
switches, including System 75, a DEFINITY Generic 1 and Generic 3, or a
DEFINITY ECS, a TN62B Hybrid pack must be used with the Universal carrier for
this purpose.
NOTE:
A DEFINITY Generic 2 may use either an ANN17B or a TN62B pack. In
either case, the latest vintage packs are recommended.
Button Numbering
Only the system manager should administer feature button assignments on the
telephone. It is recommended that you not use a feature that requires visuals (that
is, the light next to each administrable button) to be updated while the set is turned
off, or any feature that may be activated by button depression while the set is
turned off (for example, Send All Calls).
Use Figure 18-8 for button numbering on the MDW 9000 set when it is connected
to a System 75, a DEFINITY Generic 1, Generic 3 switch, or a DEFINITY ECS.
Use Figure 18-9 for button numbering on the MDW 9000 set when it is connected
toaSystem85oraDEFINITYGeneric2.
NOTE:
On System 75, a DEFINITY Generic 1 and 3, or a DEFINITY ECS, button
numbering begins with “1,” the button on the upper right of the display. On
System 85 and a DEFINITY Generic 2, button numbering starts
with “3.”