Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 8400 Series Voice Terminals
12-78The 8434 and 8434DX Voice Terminals
12
speakerphone, whichever is being used. When the user is on a call using the
handset, the VOLUME button controls the handset volume. When the voice
terminal is idle, the VOLUME control button adjusts the tone ringer.
When the user sets the volume for the speaker, speakerphone, handset, or the
tone ringer, the display on the voice terminal shows a “bar array” that indicates the
volume setting.
TEST Button
When the voice terminal is initially powered up, the green light next to the TEST
button flashes if the link with the PBX is not (or not yet) operational. The light
changes to steady green when the voice terminal is able to communicate with the
PBX. After the voice terminal is powered up, you can press the TEST button to
test the lights and the display on your voice terminal.
Display
The 8434 and 8434DX voice terminals are equipped with a built-in, 2-line by
40-character VFD display.
Display Control Buttons
These four buttons are labeled , , , and .
■ is used to enter Softkey Mode and access the 15 softkey features.
■ is used for exiting a display feature and returning to Normal
(call-handling) Mode.
■ and can be used to help you go back and forth through
the feature option screens.
Softkeys
The five buttons located below the display and labeled with arrows correspond to
features listed on the second line of the display screen. (There are five features on
each feature option screen.) The user can access any of the 15 features by
pressing the softkey below the feature abbreviation.
Menu Exit
Prev
Next
Menu
Exit
Prev
Next