DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
Cordless and Wireless Telephones
18-30The MDW 9031DCP Wireless Pocket Phone
18
Handset Cradle
The handset cradle charges a battery pack in the handset.
REFRESH button and Indicator
When you press the REFRESH button, the battery pack in the handset cradle is
refreshed by fully discharging the battery pack before recharging it. While the
battery pack is being discharged, the REFRESH and HANDSET lights go on.
HANDSET Indicator
The HANDSET light goes on when the handset battery pack is installed in the
handset and the handset is inserted correctly into the battery charger handset
cradle.
SPARE Indicator
The SPARE Battery Pack light goes on when a battery pack is positioned correctly
in the Spare battery compartment.
Battery Charging Contacts
The battery charging contacts are used for charging the handset when contact is
made with the charging cradle.
Radio Module Features
Power and Pass Indicators
The Power and Pass lights indicate when the module is powered up and
completes its self-diagnostic. The Radio indicator light goes on when the handset
is in use.
Top Hook and Card Edge
The top hook and the card edge connect the radio module to the carrier
assembly/backplane mounting rod.
Snap Lock
This lock locks the radio module into the carrier assembly.
Antenna
The sturdy and flexible antenna sends signals between the handset and the radio
module.
Power Plug Jack
The AC adapter should be inserted into this jack.