Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
Adjuncts
20-7Digital Display Modules
20
On/Off Switch
The On/Off switch turns the module on and off. The associated green status light
goes on when the module is on and is dark when the module is off.
Assignable Function Buttons
Seven additional buttons with associated green status lights. The system
manager assigns these buttons to display the control functions.
Display Functions
The following display functions are available on buttons (the actual labeling on
some buttons is shortened). If more than seven buttons are required, the
additional buttons may be assigned on the associated voice terminal.
■ Normal Mode — used to place the display in the Normal mode, in which
the display provides call-related information automatically.
■ Inspect Mode — used to place the display in the Inspect mode to permit
the user to see caller identification on an incoming or held call while active
on another call.
■ Message Retrieval — used to place the display in the Message Retrieval
mode, in which the user can retrieve messages for the voice terminal on
which the module is mounted
■ Coverage Message Retrieval — used to place the display in the
Coverage Message Retrieval mode, in which coverage agents can retrieve
messages for other terminals.
■ Next — used in Message Retrieval mode to step from one message to the
next; also used in the Integrated Directory feature to display the next name
(except on System 85 or a DEFINITY G2).
■ Delete Message — used in Message Retrieval mode to delete messages.
■ Make Call — used in Message Retrieval mode to automatically initiate a
call to the caller identified by the last displayed message (for internal calls
only); also used to automatically call internal extension numbers displayed
by the Integrated Directory feature (except on System 85 or a DEFINITY
G2).
■ Integrated Directory (except on System 85 or a DEFINITY G2) — used to
place the display in the Integrated Directory mode, in which the user can
search the system directory by entering the desired name with the dial pad,
and names with their corresponding extension numbers will be displayed.