Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
CALLMASTER Voice Terminals
13-18
13
The CALLMASTER II, CALLMASTER III, and CALLMASTER IV can be used only
with a DEFINITY ECS G3V3 and above. The CALLMASTER II and
CALLMASTER III must be aliased as a 602 CALLMASTER. The
CALLMASTER IV voice terminal can be administered as itself.
The CALLMASTER V and CALLMASTER VI can be used only with a DEFINITY
ECS Release 6.1 and later releases. The CALLMASTER V must be aliased as a
6416D+ telephone.
If the CALLMASTER VI is connected to a DEFINITY ECS switch, Release 7.1 and
prior, the CALLMASTER VI must be aliased as a 603E CALLMASTER. If the
CALLMASTER VI is connected to a DEFINITY ECS, Release 7.1 and later, the
CALLMASTER VI can be administered as itself.
Button Numbering
The following button diagram of the 602 CALLMASTER voice terminal will help
you administer this voice terminal connected to a System 75 (R1V3 or later), a
DEFINITY G1 and G3, and DEFINITY ECS, and to a System 85 (R2V2 or later) or
aDEFINITYG2.
The CALLMASTER II and CALLMASTER III can be connected only to a
DEFINITY G3.
The CALLMASTER IV is supported only with a DEFINITY G3V3.
The CALLMASTER V and VI are supported only with a DEFINITY G3
Release 6.1.
Figures 13-6 and 13-7 show button numbering for the 602 CALLMASTER.
Figure 13-8 shows button numbering for the CALLMASTER II and III.
Figure 13-9 shows button numbering for the CALLMASTER IV.
Figure 13-10 shows button numbering for the CALLMASTER V.
Figure 13-11 shows button numbering for the CALLMASTER VI.