Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
Data Modules
21-30The 8400B Plus Data Module
21
For those PC packages used to dial voice calls, the modem configuration must be
set to PULSE (P) (even though the 8400B Plus will use Touch-Tone for voice
calls). If given a choice, set modem type to HAYES.
NOTE:
While the 8400B Plus supports simultaneous voice and data, the packages
listed here support
alternate voice/data dialing only
. Voice dialing packages
interfere with data operation by remapping the COM port or by hanging up
the data call.
NOTE:
You can dial a data call while on a voice call. In all cases, the linked
telephone will work.
FCC Registration
These data modules are not FCC registered. The 8400B Plus data module meets
Part 15 Class A requirements and is labeled as such.
8400B Plus Data Module PECs
The 8400B Plus data module can be ordered in the United States using the
following PECs:
■ 8400B Plus Data Module
PEC: 2172-2WB
Comcode: 407444835
(This package contains the data module, a D8W telephone cord, an
M9/F25 Adapter, and an adjunct power kit containing a 400B2 Adapter, a
D6AP-87 cord, and a KS-22911.L2 power supply.)
NOTE:
The 8400B Plus data module comes with a stand-alone power supply.
However, it can also be closet powered.
Additional Documents
The following documents contain additional information relating to the 8400B Plus
data module:
■
8400B Plus Data Module User’s Guide
, 555-020-709