DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 7400 Series Voice Terminals
11-71The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals
11
SELECT button (on the 7407 Plus only)
The 7407 Plus (7407D02D) voice terminal has a SELECT button which can be
used in three different ways:
■ Used with the DROP/TEST button to initiate a self-test of your voice
terminal (which tests the lights, tone ringer, and display)
■ Used with the CONFERENCE/RING button to select your own
personalized ring from among eight available patterns
■ Used with the SPEAKER/RESET SPKR button to perform an acoustic test
of the environment and adjust the speakerphone to the surrounding
acoustic environment for optimal performance
Message light
The Message light goes on when a message is left for the user. It goes off when
the user retrieves the message or when the message is erased. On the 7407D
(7407D01B) voice terminal, the Message light is green; on the Enhanced 7407D
and the 7407 Plus voice terminals, the Message light is red.
Call Appearance/Feature Buttons
The 7407D, Enhanced 7407, and 7407 Plus voice terminals have 10 call
appearance/feature buttons.
Feature-only Buttons on the 7407D (7407D01B)
The 7407D (7407D01B) voice terminal has the following sets of feature buttons:
■ 11 feature buttons in the rightmost column, all without lights, which can be
used for features only.
■ 11 dual-function buttons without lights, in the second column from the right
are used as dual-function (calculator) buttons.
— When the CALCULATOR/SELECT RING button is active (the green
light next to the CALCULATOR/SELECT RING button is on), the top
button, labeled “PR,” is in the Select Ring mode for programming a
personalized ringing pattern; the lower 10 buttons have standard
hand calculator functions (which are labeled on the left of the
button). These button assignments cannot be changed.
— When the CALCULATOR/SELECT RING button is off (the green
light next to the CALCULATOR/SELECT RING button is off), all 11
of these dual-function buttons have optional features (which are
labeled on the right of the button). These features are assigned by
the system manager.
■ nine feature buttons on the bottom left, each with a green light. The two
upper buttons are for voice features. The lower seven buttons are for
display control functions and/or features.