DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 7400 Series Voice Terminals
11-18The 7402 Plus Voice Terminal
11
Features
Four Standard Fixed Feature Buttons
■ CONFERENCE/RING button
■ DROP/TEST button
■ TRANSFER button
■ HOLD button
Message Light
The red Message light goes on when a message is left for the user. It goes off
when the user retrieves the message.
Call Appearance and Feature Buttons
The 7402 Plus voice terminal has two call appearance buttons, each with a red
and green status light. The 7402 Plus also has four variable feature buttons. Each
of these feature buttons has a green status light next to it.
SELECT button
The 7402 Plus voice terminal has a SELECT button which can be used in two
ways:
■ When used with the CONFERENCE/RING button, the user can select a
personalized ring from eight ringing patterns.
■ When used with the DROP/TEST button, the user can initiate a self-test of
the lights and ringer on the voice terminal.
SPEAKER button
The 7402 Plus voice terminal has a SPEAKER button which allows the user to
place calls while on-hook, to monitor calls on which the user has been put on hold,
or retrieve messages without lifting the handset. However, the Speaker feature is
for listening only. In order to speak to the other party, the user must use the
handset (the speaker must be off).
VOLUME control button
When the speaker is active on the 7402 Plus voice terminal speaker, the VOLUME
control button affects the loudness of the Speaker (listen-only) feature.
At all other times (when the speaker is not being used), the VOLUME control
button affects the volume of the tone ringer.