Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 6200 Series Telephones
15-3The 6210 Telephone
15
Applications
The 6210 telephone can be used with the DEFINITY Communications System
Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and
System 85. The telephone has local phone features such as Hold and Redial, and
can also be used for the system features with the FLASH button.
Physical Description
Dimensions
NOTE:
The dimensions listed here for the 6210 telephone are approximate.
Width = 6.57 inches (16.69 cm)
Depth (front to back) = 8.8 inches (22.35 cm)
Height (maximum with handset in place) = 3.3 inches (8.38 cm)
Feature Buttons
Fixed Feature Buttons
The 6210 telephone has a FLASH button, which can be used for such features as
Conference with business communications systems.
This telephone also has a REDIAL button, which can be used for redialing the last
number dialed from the dial pad, either an extension or an outside number. The
number redialed can be up to 24 digits.
The 6210 also has a HOLD button, which can be used for putting a call on hold.
Message Light (only on the 6210 telephone)
The red Message light on the 6210 telephone flashes when a message is left for
the user. It goes off when the user retrieves the message. The Message light also
serves as a visual ringing indicator by flashing quickly while the telephone is
ringing.
Other Physical Features
Ringing
The 6210 telephone has electronic tone ringing. The ringer volume control
is a 3-position switch on the right side of the housing. The volume control is
labeled .