Mocomtech CDM-QX Modem User Manual


 
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–49
(ConfigODUBUCLO) - BUC LO
If LO is selected, the following sub-menu is displayed:
Edit the value of the BUC LO frequency. This is accomplished by selecting the digit to
be edited, using the WXarrow keys. The value of the digit is then changed using the
STarrow keys. The user should then press ENT. The valid range is from 0 to 35000
MHz.
Note that this value is used for displaying the RF frequency of the modem/BUC
combination. If a value of 00000 is entered here (the default) then no RF frequency will
be displayed on the ConfigTxFreq menu.
(ConfigODUBUCMix) – BUC MIX
If Mix is selected, the following sub-menu is displayed:
Select High-Side or Low-Side, using the arrow keys, then press ENT.
BUC LO Frequency:
12000 MHz ( ENT)
BUC Frequency Mix:
High-Side Low-Side ( ENT)