Filter
Top Products
11–1
Chapter 11. ETHERNET
MANAGEMENT
11.1 Introduction
The base modem is equipped with an RJ-45, 10/100BaseT Ethernet management
interface used for monitor and control purposes. This chapter of the manual will provide
a high-level overview of the functionality provided by this interface.
11.2 Ethernet Management Interface Protocols
The modem 10/100BaseT Ethernet Management Interface supports three (3) different
management protocols:
• Web Server interface for complete product management
• SNMP with public and private MIB
• Telnet interface for remote product M&C
IMPORTANT
Please make sure the unit is in Ethernet Remote Mode (Config,Remote,Ethernet)
in order to access the Web server, SNMP, or Telnet. It’s not recommended to do
write access using Web, SNMP, and Telnet at the same time.