Filter
Top Products
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-50
C.5.10 Drop & Insert Commands (E1 CCS Only) for D&I++
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for
Command or
Response to
Query
Description of arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Drop & Insert
(applies to
cards grouped
as modem)
DNI= 65 bytes Command or query.
DNI=dddddddddddddddddddddddddddddddtiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiTL
31 bytes of Drop information:
d = 31 bytes defining Timeslot locations (or channels)
t = Drop type:
(0=reserved, 1=reserved, 2=E1-CCS, 3=reserved)
31 bytes of Insert information:
I = 31 bytes defining Timeslot locations (or channels)
T = Insert type:
(0=reserved, 1=reserved, 2=E1-CCS, 3=reserved)
Timeslot definition:
0 = Unused
1-9 for timeslots 1–9, A=10, B=11, C=12, D=13…V=31.
L= reserved (set to 0)
Example:
123456789ABCDEFGHIJKLMNOPQRSTUV2123456789ABC
DEFGHIJKLMNOPQRSTUV20
Drop channels 1–31 using timeslots 1–31. Same for Insert.
Note: This command is a bit forgiving in the sense that the
modem accepts the command even though the interface type
is other than G.703. This was intentional because it’s being
used with the CRS-300 switch for 1:N redundancy.
DNI=
DNI?
DNI*
DNI#
DNI$
DNI^
DNI?
DNI?n
DNI=dddddddddddd
dddddddddddddddd
dddtiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
TL
(see description of
arguments)
Returns current D&I
configuration.
Where n=0 to 9
returns the DNI
portion of 1 of 10
stored
configurations.