Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–72
5.6.5.2 (Save/LoadLoad) – LOAD CONFIGURATION
Having selected Load, if there is a configuration stored at the selected location the
following screen will be displayed:
Note the data and time stamp identifying the stored configuration.
But if the selected location contains no data, the following screen will be displayed:
Select the location to load a configuration from, using the STarrow keys, then press
ENT. Locations 1 through 10 are available.
If the selected location contains valid data, the following screen will be displayed:
Pressing ENT or CLR will take the user back to the previous menu.
If, however, the selected location does not contain valid data, the following screen will be
displayed:
Pressing ENT or CLR will take the user back to the previous menu.
New Config has been Loade
d
from Location 9 (ENT)
Warning! Location 9
Contains No Data! (ENT)
Load Config from Location: 9
11:10:29 23/12/03 (▲ ▼ ENT)
Load Config from Location 9
Empty (▲ ▼ ENT)