Filter
Top Products
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-20
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
query
(Target to
Controller)
Test Mode
(Modem or
Tx only)
TST= 1 byte, value
of 0 through 6
Command or Query
CDM-QX Test Mode, where:
0=Normal Mode (No Test)
1=IF Loopback
2=Digital Loopback
3=I/O Loopback
4=RF Loopback
5=TX CW
6=TX Alternating 1,0 Pattern
Example: TST=1 (IF Loopback)
TST=
TST?
TST*
TST#
TST$
TST^
TST@
TST? TST=x
(see description of
arguments)
Alarm Mask MSK= 12 bytes Command or Query
Alarm mask condition, in form abcdefghijkl, where:
a=TX FIFO (0=Unmasked, 1=Masked, X=no Tx)
b=G.703 BPV (0=unmasked, 1=Masked, X=no Tx)
c=Tx-AIS (0=Unmasked, 1=Masked, X=no Tx)
d=RX AGC Alarm (0=Unmasked, 1=Masked, X=no Rx)
e=Eb/No Alarm (0=Unmasked, 1=Masked, X=no Rx)
f=RX-AIS (X=no Rx)
g=Buffer Slip (X=no Rx)
h=EXT REF Alarm
i=BUC Alarm (L-Band unit only)
j=LNB Alarm (L-Band unit only)
k=Spare
l=Spare
Example: MSK=010110010100
MSK=
MSK?
MSK*
MSK#
MSK^
MSK? MSK=abcdefghijkl
(see description
or arguments)
Local/Remote
Status
LRS= 1 byte, value
of 0, 1
Command or Query
Local/Remote status, where:
0=Local
1=Serial Remote
3=Ethernet Remote
Example: LRS=1 (Serial Remote)
LRS=
LRS?
LRS*
LRS#
LRS? LRS=x
(see description of
arguments)