Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–52
If Lower is selected, the following sub-menu is displayed:
Edit the LNB Current Alarm Lower limit. This is accomplished by selecting the digit to
be edited, using the WXarrow keys. The value of the digit is then changed using the
STarrow keys. The user should then press ENT. The range of current is from
10 to 400 mA.
(ConfigODULNBLO) LO
If LO is selected, the following sub-menu is displayed:
Edit the value of the LNB LO frequency. This is accomplished by selecting the digit to be
edited, using the WXarrow keys. The value of the digit is then changed using the
STarrow keys. The user should then press ENT. The valid range is from 0 to 35000
MHz.
Note that this value is used for displaying the RF frequency of the modem/BUC
combination. If a value of 00000 is entered here (the default) then no RF frequency will
be displayed on the ConfigRxFreq menu.
(ConfigODULNBMix) MIX
If Mix is selected, the following sub-menu is displayed:
Select High-Side or Low-Side, using the ◄ ► arrow keys, then press ENT.
LNB Current Alarm Lower
Limit: 050mA (◄ ►▲ ▼ ENT)
LNB LO Frequency:
12000 MHz (◄ ►▲ ▼
E
NT)
LNB Frequency Mix:
High-Side Low-Side (◄ ► ENT)