Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–66
5.6.4 INFO (Information)
Select Rem, Tx, Rx, Buf, Frame, Interface, Mask, Ref, or ID using the
◄ ► arrow keys, then press ENTER.
These screens display information on the current configuration of the unit. Depending on
the choice selected, one of the following screens will be displayed: using the ◄ ► arrow
keys, then press ENT.
5.6.4.1 (InfoRem) - REMOTE CONTROL INFORMATION
This screen shows if the unit is in Local or Remote mode, and gives details of the
electrical interface type selected, the unit’s address, and the baud rate selected, etc.
Pressing ENT or CLR takes the user back to the previous menu.
Examples:
INFO: Rem Tx Rx Buffer Frame
Interface Mask Ref ID
Remote M&C: RS485
-
4
Wire
Address: 0001 19200 Baud
Remote M&C: 100BaseTx
IP Addr: 255.255.255.255
Remote M&C: Monitor Only
(Local Control only)