Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–12
(ConfigRemoteEthernetGateway)
If Gateway is selected, the submenu will display:
Edit the IP Gateway Address for the Ethernet M&C port for this unit. This is
accomplished by selecting the digit to be edited, using the ◄ ► arrow keys. The value
of the digit is then changed using the
▲ ▼ arrow keys. The user should then press ENT.
(ConfigRemoteEthernetAddress)
If Address is selected, the submenu will display:
Edit the IP Address and Range for the Ethernet M&C port for this unit. This is
accomplished by selecting the digit to be edited, using the ◄ ► arrow keys. The value
of the digit is then changed using the STarrow keys. The user should then press ENT.
(ConfigRemoteEthernetMAC)
If MAC is selected, the user will only be allowed to view it as displayed for example:
This is a read-only window, which displays the factory program MAC address for the
Ethernet management interface.
(ConfigRemoteEthernetSNMP)
If SNMP is selected, the following sub-menu is displayed:
M&C Ether IP Address/Range:
192.168.001.001/24 (◄ ►▲ ▼,ENT)
M&C Ethernet IP Gateway:
192.128.001.001 (◄ ►▲ ▼, ENT)
M&C Port MAC Address:
00-06-B0-00-00-D5
SNMP: Communities Traps
(◄ ►, ENT)