Filter
Top Products
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-18
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
query
(Target to
Controller)
Card Interface
Type
ITF= 1 byte Command or Query.
Terrestrial interface type, where:
0=RS422/EIA530 DCE (Command or Query)
1=V.35 DCE (Command or Query)
2=RS232 (SYNC) (Command or Query)
3=G.703 TI Bal AMI (Command or Query)
4=G.703 T1 Bal B8ZS (Command or Query)
5=G.703 E1 Unbal AMI (Command or Query)
6=G.703 E1 Unbal HDB3 (Command or Query)
7=G.703 E1 Bal AMI (Command or Query)
8=G.703 E1 Bal HDB3 (Command or Query)
9=HSSI (Query only)
A=ASI (Query only)
B=G.703 TI Unbal AMI (Command or Query)
C=G.703 T1 Unbal B8ZS (Command or Query)
D=Quad Drop & Insert
F=None (Query only)
All other codes are invalid. Example: ITF=1 (V.35)
ITF=
ITF?
ITF*
ITF#
ITF$
ITF^
ITF? ITF = x
(see description
of arguments)
Framing Mode
(Modem only)
FRM= 1 byte, value
of 0, 1, 2
Command or Query
Unit operating mode, where:
0=Unframed
1=EDMAC Framing
2=EDMAC-2 Framing
3=D&I++ Framing
Example: FRM=0 (unframed)
FRM=
FRM?
FRM*
FRM#
FRM^
FRM? FRM=x
(see description
arguments)
EDMAC
Framing Mode
(Modem only)
EFM= 1 byte, value
of 0, 1, 2
Command or Query
EDMAC mode, where:
0=EDMAC Off (Framing is on, AUPC active)
1=EDMAC Master
2=EDMAC Slave (Query Only)
Example: EFM=1 (EDMAC Enabled as Master)
EFM=
EFM?
EFM*
EFM#
EFM^
EFM? EFM=x
(see description of
arguments)