Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–21
(ConfigTxPwrAUPC) – TARGET Eb/No
Edit the target Eb/No of the remote demod, using the ◄ ►
and STarrow keys.
Default value is 3.0 dB, and upper limit is 9.9 dB. The user should then press ENT.
(ConfigTxPwrAUPC) – MAX RANGE
Edit the maximum permitted increase in power level (when in AUPC mode), using the
STarrow keys. Default value is 1dB, and upper limit is 9 dB. Then press ENT.
(ConfigTxPwrAUPC) – ALARM
Select the action that will occur if the AUPC causes the maximum output power level to
be reached, either None or TxAlarm. Then press ENT.
(ConfigTxPwrAUPC) – DEMOD-UNLOCK
Select the action that will occur if the remote demod is unlocked. The choices are: Nom-
Pwr (Nominal Power), where the output level will revert to the nominal power level set
under Manual, or Max-Pwr, (Maximum Power), where the output level will change to
the maximum permitted. The user should then press ENT.
Remote Demod
-
Target Eb/No
Min Eb/No:9.9dB (◄ ►, ▲ ▼, ENT)
Maximum-permitted Power
increase: 01dB (▲ ▼, ENT)
Action when max Tx Power
reached: None TxAlarm (◄ ►,
Action when Remote Demo
d
unlocks: Nom-Pwr Max-Pwr