Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Preface MN/CDMQx.IOM
ix
INSTALLATION
The installation and connection to the line supply must be made in compliance to local or
national wiring codes and regulations.
The CDM-Qx is designed for connection to a power system that has separate ground, line
and neutral conductors. The equipment is not designed for connection to power system
that has no direct connection to ground.
The CDM-Qx is shipped with a line inlet cable suitable for use in the country of
operation. If it is necessary to replace this cable, ensure the replacement has an equivalent
specification. Examples of acceptable ratings for the cable include HAR, BASEC and
HOXXX-X. Examples of acceptable connector ratings include VDE, NF-USE, UL, CSA,
OVE, CEBEC, NEMKO, DEMKO, BS1636A, BSI, SETI, IMQ, KEMA-KEUR and
SEV.
CAUTION
The modulator and demodulator cards shall not be plugged-in when the
modem is powered on. Damage to the cards can be the result.
International Symbols:
Symbol Definition Symbol Definition
~
Alternating Current
Protective Earth
Fuse
Chassis Ground