Filter
Top Products
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-34
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response
to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Number of
Unread Stored
Events
N/A 3 bytes Query only
Unit returns the number of stored Events, which remain
Unread, in the form of xxx.
Note: This means unread over the remote control.
Example: NUE=126
N/A NUE? NUE=xxx
(see description of
arguments)
Retrieve next 5
unread stored
Events
N/A 80 bytes Query only
Unit returns the oldest 5 Stored Events, which have not
yet been read over the remote control. Reply format:
{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body{CR}Sub-body{CR}, where Sub-body =
ABCCddmmyyhhmmss,
A being the fault/clear indicator
F=Fault
C=Clear
I =Info
B being the fault type where:
1=Unit
2=RX Traffic on slot#1
3=RX Traffic on slot#2
4=RX Traffic on slot#3
5=RX Traffic on slot#4
6=TX Traffic on slot#1
7=TX Traffic on slot#2
8=TX Traffic on slot#3
9=TX Traffic on slot#4
A=ODU
B=Power ON/OFF, or log cleared
CC is Fault Code numbers, as in FLT? Or Infor Code, which
is:
0=Power Off
1=Power On
2=Log Cleared
3=Global Config Change
4=Redundancy Config Change
If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros.
If there are no new events, the response is RNE*.
N/A RNE? RNE=
{CR}ABCCddmmyyhh
mmss{CR}ABCCddm
myyhhmmss{CR}ABC
Cddmmyyhhmmss
{CR}ABCCddmmyyhh
mmss{CR}ABCCddm
myyhhmmss
(see description of
arguments)