Filter
Top Products
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-15
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
query
(Target to
Controller)
RX Data Rate RDR= 9 bytes Command or Query
RX Data Rate, in kbps, between 32 kbps and 20 Mbps
Resolution = 1 bps. (See Chapter 5 for valid rates)
Query ONLY if Interface Type is Quad Drop & Insert
(ITF=D).
Example: RDR=02047.999
RDR=
RDR?
RDR*
RDR#
RDR$
RDR^
RDR@
RDR? RDR=xxxxx.xxxx
(see description
of arguments)
RX Spectrum
Invert
RSI= 1 byte, value of
0, 1
Command or Query
RX Spectrum Invert, where:
0=Normal
1=RX Spectrum Invert
Example: RSI=0 (Normal)
RSI=
RSI?
RSI*
RSI#
RSI$
RSI^
RSI@
RSI? RSI=x
(see description of
arguments)
RX
Descrambler
RDS= 1 byte, value of
0 1, 2
Command or Query
RX Descrambler state, where:
0=Off
1=On (default descrambler type)
2=On (IESS-315 Turbo only)
RDS=
RDS?
RDS*
RDS#
RDS$
RDS^
RDS@
RDS? RDS=x
(see description of
arguments)
RX Data Invert RDI= 1 byte, value of
0, 1
Command or Query
Invert Receive Data, where:
0=Normal
1=Inverted
Example: RDI=1 (Inverted RX Data)
RDI=
RDI?
RDI*
RDI#
RDI$
RDI^
RDI@
RDI? RDI=x
(see description of
arguments)
RX Data Clock
Invert
RCI= 1 byte, value of
0, 1
Command or Query
Invert Receive Data Clock, where:
0=Normal
1=Inverted
RCI=
RCI?
RCI*
RCI#
RCI$
RCI^
RCI@
RCI? RCI=x
(see description of
arguments)