CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–20
(ConfigTxPwr) – TRANSMIT POWER LEVEL MODE
Select the output power level mode, either Manual or AUPC, then press ENT.
If the user selects Manual, the following menu is displayed:
(ConfigTxPwrManual) – MANUAL MODE
Edit the output power level using the ◄ ► and STarrow keys, then press ENT.
If the user selects AUPC, and ‘Framed’ mode is not selected, the following menu is
displayed:
Pressing either ENT or CLR returns the user to the previous menu with Manual
selected.
If the user selects AUPC, and ‘Framed’ mode is selected, the following menu is
displayed:
(ConfigTxPwrAUPC) – AUPC MODE
Select either Target EbNo, Max-Range, Alarm or Demod-Unlock using the W Xarrow
keys. The user should then press ENT.
Output Power Level Mode:
Manual AUPC (◄ ►, ENT)
Tx Output Power Level:
-03.9 dBm (◄ ►, ▲ ▼, ENT)
Warning! AUPC needs
Framed Mode (ENT or CLR)
Target-Eb/No Max
-
R
ange Alarm
DemodUnlock (◄ ►, ENT)