Filter
Top Products
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-26
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for Command
or Response
to Query
Description of arguments
Response
to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
RTC Time TIM= 6 bytes Command or Query
A time in the form hhmmss, indicating the time from
midnight, where:
hh=hours (00 to 23)
mm=minutes (00 to 59
ss=seconds (00 to 59)
Example: TIM=231259 (23 hours, 12 minutes
59 seconds)
TIM=
TIM?
TIM*
TIM#
TIM^
TIM? TIM= hhmmss (see
description and
arguments)
Clear All Stored
Events
CAE= None Command only
Forces the software to clear the software events log.
Example: CAE=
Note: This command takes no arguments.
CAE=
CAE?
CAE*
CAE#
CAE^
N/A N/A
Initialize Events
Pointer
IEP= None Command only
Resets internal pointer to allow RNE? Queries to start at
the beginning of the stored events log.
IEP=
IEP#
IEP^
N/A N/A
Statistics
Sample Interval
SSI= 1 byte,
numerical
Command or Query
Used to set the sample interval for the Statistics Logging
Function SSI=x, where x = 0 to 9 in 10-minute steps
Note: Setting this parameter to 0 disables the statistics
logging function.
Example: SSI=3 means 30 minutes
SSI=
SSI?
SSI*
SSI#
SSI^
SSI?
Clear All Stored
Statistics
CAS= None Command only
Forces the software to clear the software statistics log.
Example: CAS=
Note: This command takes no arguments.
CAS=
CAS?
CAS*
CAS#
CAS^
N/A N/A
Initialize
Statistics
Pointer
ISP= None Command only
Resets internal pointer to allow RNS? Queries to start at
the beginning of the statistics log.
ISP=
ISP#
ISP^
N/A N/A