Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–39
If HSSI is selected, the following sub menu will be displayed:
The option is changed using the STarrow keys. The user should then press ENT. The
following options are possible:
TA to CA Loop
TA and CA are looped, but TA does not control the ON/OFF
state of the carrier.
RR controls CA, TA controls
Tx Out
TA controls the ON/OFF state of the carrier (in other words, the
modem will not bring up its TX carrier until TA is asserted.
If G.703 is selected, the following sub menu will be displayed:
If G.703 balanced interface, the user can select either T1 or E1-Balanced. If G.703
unbalanced interface, the user can select either T1 or E1-Unbalanced. Use the ◄ ►
arrow keys to select, then press ENT.
If T1 is selected, the following sub-menu will be displayed:
Select Length or Line Code using the ◄ ► arrow keys, then press ENT.
If Line –Code is selected, the following sub-menu will be displayed:
Select HDB3 or AMI using the ◄ ► arrow keys, then press ENT.
G.703 Type: T1 E1
-
B
alance
d
E1-Unbalanced (◄ ►,
T1 Configuration:
Length Line-Code (◄ ►, ENT)
G.703 T1 Line Code:
HDB3 AMI (◄ ►, ENT)
HSSI Mode Select: (▲
▼
, ENT
)
TA to CA Loop