Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–75
5.6.6.5 (UtilityDisplay) - DISPLAY BRIGHTNESS
Edit the display brightness, using the STarrow keys. The user should then press ENT.
5.6.6.6 (UtilityFirmware) - FIRMWARE
This series of sub-menus permits the user to view information about the CDM-Qx
internal firmware. The modem can store two complete firmware images, and the user can
select which image will be loaded the next time the unit re-boots.
IMPORTANT
THESE MENUS ARE FOR DIAGNOSTIC PURPOSES. ONLY CHANGE AN
IMAGE IF INSTRUCTED TO DO SO BY COMTECH EF DATA CUSTOMER
SERVICE TECHNICIANS.
Select either Information or Select, using the
WXarrow keys. The user should then
press ENT.
If the user selects Information, the following sub-menu is displayed:
The user may select, using the
WXarrow keys and ENT key, to view information about
the Bootrom, the 2 images, or the CPLD on the modulator or demodulator card.
Each image can be viewed as follows:
By using the STarrow keys, the user can view each component of the firmware image.
Edit Display Brightness:
100% (▲▼, ENT)
Firmware Images: Update
-
C
PLD
Information Select (◄ ► ENT)
F/W Information: Bootrom
Image#1 Image#2 CPLD
Image#x: Bulk Firmware (
▲
▼ ENT)
FWxxxxx 01/01/04 1.1.1