Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–61
5.6.3 TEST:
Selecting Test will display this sub-menu:
Select Mode, BIST, or Spec-Analyzer using the ◄ ► arrow keys, then press ENT.
Note that BIST stands for built-in system test. Selecting Mode will display this sub-
menu:
All the modes are available if grouped as modem. However, in ungrouped case, for
example Tx, Norm, Tx-CW, and Tx1-0 are the only selection. For Rx only, it is always
in Norm.
Select Norm, IF Loop, Dig Loop, I/O Loop, RF Loop, Tx-CW, or Tx-1,0, using the
◄ ► arrow keys, then press ENT.
Mode: Norm IF2 Dig2 I/O2
R
F2
Tx-CW Tx1-0 (◄ ►, ENT)
TEST: Mode BIST (◄ ►,
E
NT)
Spec-Analyzer