Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–69
5.6.4.4 (InfoBuffer) - BUFFER INFORMATION
This displays if the buffer is enabled or disabled, shows the exact clocking mode
(TX=RX, or TX<> RX), and the buffer size. Pressing ENT takes the user back to the
previous menu.
5.6.4.5 (InfoFrame) – FRAMING AND EDMAC INFORMATION
Examples:
This screen shows EDMAC mode, and shows if the unit is an EDMAC MASTER or
SLAVE, with the appropriate address. Pressing ENT or CLR takes the user back to the
previous menu.
5.6.4.6 (InfoInterface) – INTERFACE INFORMATION
This screen shows details of the electrical interface type of the main data port. If RS422,
V.35 or RS232 is selected, the menu will also indicate the operation of RTS/CTS.
Pressing ENT or CLR takes the user back to the previous menu.
Example:
Buffer: Enabled (Tx=Rx)
(ENT)
Framing: AUPC
-
O
nly, D&I++
(ENT or CLR)
Framing:AUPC-
O
nly,EDMAC2
(ENT or CLR)
Framing: AUPC+EDMAC
Slave, 0241 (ENT or CLR)
Framing: AUPC+EDMAC2
Master,0240 (ENT or CLR)
Interface: RS422 (ENT)
RTS/CTS Loop, No Action