Filter
Top Products
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-14
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
query
(Target to
Controller)
RX Demod
Type
RMD= 1 byte, value
of 0 through 5
Command or Query
RX Demodulator, where:
0=BPSK
1=QPSK
2=Reserved
3=8-PSK
4=16-QAM (Turbo or Viterbi + Reed-Solomon)
5=Reserved
Depending on FEC type, not all of these selections
will be valid. All other codes are invalid.
Example: RMD=1 (QPSK)
RMD=
RMD?
RMD*
RMD#
RMD$
RMD^
RMD@
RMD? RMD=x
(see description
of arguments)
RX FEC Code
Rate
RCR= 1 byte, value
of 0 through 7
Command or Query
0=Rate 5/16 (Turbo Only)
1=Rate 21/44 (Turbo Only)
2=Rate 1/2
3=Rate 2/3 (8-Psk TCM or 8-QAM only)
4=Rate 3/4
5=Rate 7/8
6= Rate 17/18 (Turbo Only)
7= Reserved
Depending on FEC and demodulation type, not all of
these selections will be valid.
Example: RCR=4 (Rate 3/4)
RCR=
RCR?
RCR*
RCR#
RCR$
RCR^
RCR@
RCR? RCR=x
(see description
of arguments)
RX Reed-
Solomon (n, k)
values
RRS= 1 byte, value
of 0 through 3
Command or Query.
RX Reed-Solomon (n, k) values, where:
0=Unframed closed network (220,200)
1=EFD closed network (225,205)
2=IESS-310 compatible operation (219,201)
3=EDMAC mode, closed (200,180) – EDMAC only
Notes:
1. Selection is valid only when RFT=2 or RFT=5.
2. For D&I++, selection 0,1, and 2 are supported.
RRS=
RRS?
RRS*
RRS#
RRS$
RRS^
RRS@
RRS? RRS=x
(see description
of arguments)