Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–8
5.5 Opening Screen
This screen is displayed whenever power is first applied to the unit (70/140 MHz
version). The word “CDM-Qx” will be replaced with “CDM-QxL” for L-Band units.
Pressing any key will take the user to the top-level selection screen:
5.6 TOP LEVEL SELECTION
The user is presented with the following choices:
Config
(Configuration) This menu branch permits the user to fully configure the
unit.
Monitor
This menu branch permits the user to monitor the alarm status of the unit,
to view the log of stored events, and to display the Receive Parameters
screen.
Test
This menu branch permits the user to invoke one of several test modes
(loopbacks, for example).
Info
(Information) This menu branch permits the user to view information on
the unit, without having to go into configuration screens.
Save/Load
This menu branch permits the user to save and to retrieve up to 10
different modem configurations.
Util
(Utility) This menu branch permits the user to perform miscellaneous
functions, such as setting the Real-time clock, adjusting the display
brightness, etc. For L-Band unit, the menu “Util” will be replaced with
“Utility”.
ODU
(70/140 MHz only)
This menu permits the user to monitor and control Comtech CSAT and
KST transceivers.
Comtech EF Data CDM
-
Q
x
Firmware Version: 1.1.1
MAIN MENU: Config Monitor
Test Info Save/Load Util ODU