Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–40
If Length is selected, the following sub-menu will be displayed:
Edit the line length using the STarrow keys, then press ENT Values will toggle
between the following values:
0-133, 133-266, 266-399, 399-533, and 533-655 feet.
If either E1-Balanced or E1-Unbalanced is selected, the following sub-menu will be
displayed:
Select HDB3 or AMI using the W Xarrow keys, then press ENT.
If QDI is selected, the following sub-menu will be displayed:
In this sub menu, the user can select one of the four (4) ports to be configured. Choosing
either one of them will display the next sub-menu as follows:
Where X is the tributary port number. If Drop is selected, the next sub-menu will be
This sub-menu shows the Nx64kbps data rate where N=24 in this example. Use
STarrow keys to set the data rate. After pressing ENT, a sub-menu will appear as
shown:
Where x is the tributary port number. A X display means that there are more channels
beyond channel 6 as in this example. Use right arrow key X to view more. sure that ENT
key is pressed once it’s done.
T1 Line Length:
000-133 feet (▲ ▼,
ENT)
G.703 E1 Line Code:
HDB3 AMI (◄ ►, ENT)
QDI Tributary Ports:
1 2 3 4 (◄ ►, ENT)
Port#X: Drop Insert LineCode
Alarm (◄ ►, ENT)
Port#X Tx Trib Rate:(▲▼, ENT)
01536.000kbps (24x64kbps)
Px D-CH: 1 2 3 4 5 6 ►
TS: 11 02 06 04 05 03