Filter
Top Products
CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–7
Para Title Remarks
5.5 Opening Screen
5.6 Main Menu Select: Config; Monitor; Test; Info; Save/Load; Util; ODU
5.61 Conf: Select: Remote; Tx; Rx; Group; Frame; Interface; Ref; Mask; ODU
5.6.1.1
Config → Remote
Select: Local; Serial; Ethernet
5.6.1.2
Config → Tx Select: FEC; Mod; Code; Data; Freq; On/Off; Pwr; Scram; Clk; Inv; Txα
5.6.1.3
Config → Rx
Select: FEC; Demod; Code; Data; Freq; Acq; Descram; Buf; Inv; Misc; CNC
5.6.1.4
Config → Group
Select: Modem; Redundancy
5.6.1.5
Config → Frame
Select: Unframed; EDMAC; EDMAC-2; D&I++
5.6.1.6
Config → Interface
Select: RS422; V.35; RS232; HSSI; ASI; G.703; QDI; None
5.6.1.7
Config → Ref
Select: Internal; 10MHz
5.6.1.8
Config → Mask
Select: Transmit; Receive; Reference; BUC; LNB
5.6.1.9
Config → ODU
Select: BUC; LNB
5.6.2 Monitor Select: Alarms; Rx-Params; Event-Log; Stats; AUPC; CNC; ODU
5.6.2.1
Monitor → Alarms
Select: Transmit; Receive; Unit; ODU
5.6.2.2
Monitor → Rx-Params Select: Eb/No, BER, ΔF, BUF, RSL
5.6.2.3
Monitor → Event-Log
Select: View; Clear-All
5.6.2.4
Monitor → Stats
Select: View; Clear-All; Config
5.6.2.5
Monitor → AUPC
Framing is required for AUPC Monitor
5.6.2.6
Monitor → CnC Carrier in Carrier® (CnC) is not locked.
5.6.2.7
Monitor → ODU
Select: ODU; LNB
5.6.3 Test Select: Mode; BIST; Spec-Analyzer
5.6.4 Info Select: Rem; Tx; Rx; Buffer; Frame; Interface; Mask; Ref; ID
5.6.5 Save/Load Select: Save; Load
5.6.6 Utility Select: RxBuffer; Clock; Ref; ID; Display; Firmware; FAST
5.6.7
Utility→FAST
Select: Base; Slot1; Slot2; Slot3; Slot4
Figure 5-3. Principle Menu Tree