Filter
Top Products
Individual Instruction Descriptions
4-168
4.14.72 SHLSPL Shift Left With Subtract PL
Syntax
[label] name dest, src [, mod] Clock, clk Word, w With RPT, clk Class
SHLSPL An, {adrs} Table 4–46 Table 4–46 1b
SHLSPL An[~], An[~] [, next A] 1 1 n
R
+3 3
Execution [premodify AP if mod specified]
PH, PL ⇐ src << SV
dest ⇐ dest – PL
PC ⇐ PC + 1
Flags Affected OF, SF, ZF, CF are set accordingly
src is {adrs}: TAG bit is set accordingly
Opcode
Instructions 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SHLSPL An, {adrs}
0 1 1 1 0 1 0 An adrs
x dma16 (for direct) or offset16 (long relative) [see section 4.13]
SHLSPL An[~], An[~] [, next A] 1 1 1 0 0 next A An 1 1 1 0 0 0 A~ ~A
Description Premodify the accumulator pointer if specified. Shift accumulator or data memory
value pointed by {adrs} to left n
SV
bits (as specified by the SV register) into a 32-bit
result. This result is zero-filled on the right and either zero-filled or sign-extended on
the left (based on the setting of the extended sign mode (XM) bit in the status register).
The upper 16 bits are latched into the product high (PH) register. The lower 16 bits of
the result [product low (PL) register] is subtracted from the destination accumulator (or
its offset). This instruction propagates the shifted bit to the next accumulator.
Syntax Description
SHLSPL An, {adrs} Shift data memory word left, substract PL from An
SHLSPL An[~], An[~] [, next A] Shift An[~] left, substract PL to An[~]
See Also SHLSPLS, SHLTPL, SHLTPLS, SHLAPL, SHLAPLS
Example 4.14.72.1 SHLSPL A0, *R4++R5
Shift the word pointed by the byte address stored in R4 by n
SV
bits to the left, subtract the shifted (PL)
from Accummulator A0, and store the result in accumulator A0. Add R5 to R4 and store result in R4
PH holds the upper 16 bits of the shift.
Example 4.14.72.2 SHLSPL A2, *R1++
Shift the word pointed by the byte address stored in R1 by n
SV
bits to the left, subtract the shifted value
(PL) from the accumulator A2, and store the result in accumulator A2. Increment R1 (by 2). PH holds
the upper 16 bits of the shift.
Example 4.14.72.3 SHLSPL A1, A1, ++A
Preincrement accumulator pointer AP1. Shift the accumulator A1 by n
SV
bits to the left, subtract PL from
A1, and store result in accululator A1. After execution PH contains the upper 16 bits of the 32-bit shift.