Filter
Top Products
MSP50C6xx Development Tools Guidelines
5-5Code Development Tools
If the user is developing host code to be used with a catalog MSP50C604
operating in slave mode:
Hardware
Catalog device
SPEECH-EVM
†
PC50C604
†
†
These items are not needed if the customer designs their own preproduction application boards.
‡
Speech-EVM and EVA50C605 have similar functionality. They both function as basic target boards that support code
development. For more information about these boards refer to Section 5.2.2.
5.2.1.2 Speech Editing Tools
For editing and analyzing speech for the MSP50C6xx family the following is
needed:
Hardware
SDS-6000
Software
SDS-6000 speech editing software
5.2.2 Tools Definitions
5.2.2.1 Hardware Tools Definitions
Note:
All the following TI part numbers can be purchased through authorized TI
distributors (see http://www.ti.com/sc/docs/general/distrib.htm).
Please contact TI speech applications group (email:
Speak2Me@list.ti.com) for the latest version of the software.
MSPSCANPORTI/F
The MSP scanport interface board connects the PC’s parallel port to the
MSP50P614 or MSP50C6xx scanport. The user must provide a way of
connecting the MSP scanport interface to their application board. See
Section 5.1 for more details about this requirement.
SDK50P614
This is a software developers kit that contains 15 units of MSP50P614s
(EPROM devices). The customer will need to have access to an EPROM
eraser (not supplied by TI) to erase these devices.
EPC50C605