AMD 4.4.5 Switch User Manual


 
AMD Confidential
User Manual November 21
st
, 2008
12 Chapter 3: Graphical User Interface
Figure 3-4: Add Connection Dialog of Device Properties Window
A device's connection appears in the “Connections” tab of the Device Properties window
for each device, as shown in Figure 3-4.
When you add a connection, the simulator shell sends a reset message to all of the
devices in the workspace. The global reset is equivalent to power-cycling the simulated
computer system.
3.2.2.2 Configure Device
Most devices provide configuration options. Selecting Configure Device from the
workspace popup menu produces a dialog window containing options for the specified
device.
Selecting the Connections tab in the Device Properties window will display a list of all
connections between the specified device and any other devices in the workspace.
3.2.2.3 Disconnect Device
Please note that this feature is not supported by the public release version of the
simulator. Selecting Disconnect Device from the workspace popup menu removes all
connections to the specified device.