Filter
Top Products
Appendix K Router Platform User Interface Reference
NAT Policy Page
K-10
User Guide for Cisco Security Manager 3.2
OL-16066-01
Port Redirection Applies only when Static Port is the selected static rule type.
Redirect Port—When selected, specifies port information for the inside
device in the translation. This enables you to use the same public IP address
for multiple devices as long as the port specified for each device is different.
Enter information in the following fields:
• Protocol—The protocol type: TCP or UDP.
• Local Port—The port number on the source network. Valid values range
from 1 to 65535.
• Global Port—The port number on the destination network that the router
is to use for this translation. Valid values range from 1 to 65535.
When deselected, port information is not included in the translation.
Table K-5 NAT Static Rule Dialog Box (Continued)