Filter
Top Products
K-85
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
PPP/MLP Policy Page
Multilink Group Applies only to serial, Group-Async, and multilink interfaces.
Restricts the physical link to the selected multilink-group interface. Enter the
name of a multilink interface or interface role, or click Select to display an
Object Selectors, page F-593.
If the interface role you want is not listed, click the Create button in the
selector to display the Interface Role Dialog Box, page F-464. From here
you can create an interface role object.
This option is typically used in static leased-line environments, where the
remote systems to which the device’s serial lines are connected are known in
advance.
In effect, this option dedicates a specific interfaces to a particular user, even
when that user is not connected. If a peer at the other end of the link tries to
join a different bundle, the connected is severed.
Maximum Fragment
Delay
The maximum amount of time that should be required to transmit a fragment
on the MLP bundle. Valid values range from 1 to 1000 milliseconds.
Fragment size is determined by the defined fragment delay and the
bandwidth of the links.
Note Serial interfaces do not support this feature.
Table K-36 PPP Dialog Box—MLP Tab (Continued)