Filter
Top Products
K-101
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
Accounts and Credential s Policy Page
Navigation Path
Go to the Accounts and Credential s Policy Page, page K-98, then click the Add
or Edit button beneath the table.
Related Topics
• Defining Accounts and Credential Policies, page 15-73
• User Accounts and Device Credentials on Cisco IOS Routers, page 15-72
• Understanding FlexConfig Objects, page 9-52
Field Reference
Table K-44 User Account Dialog Box
Element Description
Username The username for accessing the router.
Password The password for accessing the router with this user account.
Note You can discover an encrypted password, but any password you enter
must be in clear text.
Confirm Confirms the password for this user account.
Encrypt password using
MD5
When selected, uses MD5 encryption to encrypt the password for this user
account. This is the default.
When deselected, the password is sent to the router unencrypted.
Privilege Level The privilege level assigned to the user account. Valid values range from 0
to 15:
• 0—Grants access to these commands only: disable, enable, exit, help,
and logout.
• 1—Enables nonprivileged access to the router (normal EXEC-mode use
privileges).
• 15—Enables privileged access to the router (traditional enable
privileges).
Note Levels 2-14 are not normally used in a default configuration, but
custom configurations can be created by moving commands that are
normally at level 15 to a lower level and commands that are normally
at level 1 to a higher level. You can configure the privilege levels of
commands using the CLI or by defining a FlexConfig.