Filter
Top Products
K-111
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
HTTP Policy Page
HTTP Page—Setup Tab
Use the Setup tab of the HTTP page to enable HTTP and HTTP over Secure
Socket Layer (HTTP over SSL or HTTPS) on the router. You can optionally limit
access to these protocols to the addresses defined in an access control list.
Note As a general rule, Cisco IOS routers that have been discovered by Security
Manager already have HTTPS enabled because Security Manager uses SSL as the
default protocol for communicating with them. See Setting Up SSL on Cisco IOS
Routers, page 5-6.
Navigation Path
Go to the HTTP Policy Page, page K-110, then click the Setup tab.
Related Topics
• HTTP Page—AAA Tab, page K-112
• HTTP and HTTPS on Cisco IOS Routers, page 15-83
Field Reference
Table K-49 HTTP Page—Setup Tab
Element Description
Enable HTTP When selected, an HTTP server is enabled on the router.
When deselected, HTTP is disabled on the router. This is the default for
devices that were not discovered.
HTTP Port The port number to use for HTTP. Valid values are 80 or any value from 1024
to 65535. The default is 80.