Filter
Top Products
K-235
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
EIGRP Routing Policy Page
Protocol to Redistribute
(continued)
• OSPF—Redistributes a different OSPF process. You can define a single
mapping for each process. Select a process from the displayed list, then
select one or more match criteria:
–
Internal—Routes that are internal to a specific AS.
–
External1—Routes that are external to the AS and imported into
OSPF as a Type 1 external route.
–
External2—Routes that are external to the AS and imported into the
selected process as a Type 2 external route.
–
NSAAExternal1—Not-So-Stubby Area (NSSA) routes that are
external to the AS and imported into the selected process as Type 1
external routes.
–
NSAAExternal2—(NSSA) routes that are external to the AS and
imported into the selected process as Type 2 external routes.
• RIP—Redistributes RIP routes.
• Connected—Redistributes routes that are established automatically by
virtue of having enabled IP on an interface. These routes are
redistributed as external to the AS.
Metrics The default metric (cost) of the redistributed route. Metric parameters
include:
• Bandwidth—The minimum bandwidth of the path in kilobits per second.
Valid values range from 1 to 4294967295.
• Delay—The mean latency of the path in units of 10 microseconds. Valid
values range from 0 to 4294967295.
• Reliability—A value expressing the estimated reliability of the link.
Valid values range from 0 to 255, where 255 represents 100% reliability.
• Effective Bandwidth—A value expressing the effective load on the link.
Valid values range from 1 to 255, where 255 represents 100%
utilization.
• MTU of Path—The maximum transmission unit of the path. Valid values
range from 1 to 65535 bytes.
Table K-108 EIGRP Redistribution Mapping Dialog Box (Continued)