Filter
Top Products
K-237
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
OSPF Interface Policy Page
Tip To choose which columns to display in the table, right-click a column header, then
select Show Columns. For more information about table display options, see
Table Columns and Column Heading Features, page 3-26.
Key ID The identification number of the authentication key used for MD5
authentication.
Cost The cost of sending packets over the selected interface, if this value is
different from the cost as normally calculated.
Priority The priority of the selected interface.
MTU Ignore Indicates whether Maximum Transmission Rate (MTU) detection is disabled
on the selected interface.
Database Filter Indicates whether link-state advertisement (LSA) flooding is disabled on the
selected interface.
Hello Interval The interval between hello packets (in seconds) sent over this interface.
Transmit Delay The amount of time OSPF waits (in seconds) before flooding an LSA over
the link.
Retransmit Interval The interval between LSA retransmissions (in seconds) over the selected
interface.
Dead Interval The interval OSPF waits (in seconds) before declaring a neighboring router
dead because of an absence of hello packets.
Network Type The network type configured for the selected interface, if it differs from the
default medium.
Add button Opens the OSPF Interface Dialog Box, page K-238. From here you can
define the properties of an OSPF interface.
Edit button Opens the OSPF Interface Dialog Box, page K-238. From here you can edit
the properties of the selected OSPF interface.
Delete button Deletes the selected OSPF interface definitions from the table.
Save button Saves your changes to the Security Manager server but keeps them private.
Note To publish your changes, click the Submit icon on the toolbar.
Table K-109 OSPF Interface Page (Continued)