Filter
Top Products
Appendix K Router Platform User Interface Reference
PVC Policy Page
K-68
User Guide for Cisco Security Manager 3.2
OL-16066-01
Field Reference
Define Mapping Dialog Box
Use the Define Mapping dialog box to configure the IP protocol mappings to use
on the ATM PVC. Mappings are required by the PVC to discover which IP address
is reachable at the other end of a connection. Mappings can either be learned
dynamically using Inverse ARP (InARP) or defined statically. Static mappings are
best suited for simple networks that contain only a few nodes.
Note Inverse ARP is only supported for the aal5snap encapsulation type. See PVC
Dialog Box—Settings Tab, page K-59.
Tip Use the CLI or FlexConfigs to configure mappings for protocols other than IP.
Navigation Path
Go to the PVC Dialog Box—Protocol Tab, page K-67, then click Add or Edit.
Related Topics
• PVC Dialog Box, page K-56
• Defining ATM PVCs, page 15-52
Table K-28 PVC Dialog Box—Protocol Tab
Element Description
IP Protocol Mapping Displays the IP protocol mappings configured for the PVC.
Add button Opens the Define Mapping Dialog Box, page K-68. From here you can
define an IP protocol mapping.
Edit button Opens the Define Mapping Dialog Box, page K-68. From here you can edit
the selected mapping.
Delete button Deletes the selected mapping from the table.