Filter
Top Products
Appendix K Router Platform User Interface Reference
EIGRP Routing Policy Page
K-234
User Guide for Cisco Security Manager 3.2
OL-16066-01
EIGRP Redistribution Mapping Dialog Box
Use the EIGRP Redistribution Mapping dialog box to add or edit the properties
of an EIGRP redistribution mapping.
Navigation Path
Go to the EIGRP Page—Redistribution Tab, page K-232, then click the Add or
Edit button beneath the table.
Note You must create at least one EIGRP AS before you can access the EIGRP
Redistribution dialog box. See EIGRP Page—Setup Tab, page K-226.
Related Topics
• Redistributing Routes into EIGRP, page 15-190
Field Reference
Table K-108 EIGRP Redistribution Mapping Dialog Box
Element Description
EIGRP AS Numbers The EIGRP AS into which other routes are being redistributed. You must
select an ID number from the list of EIGRP autonomous systems defined in
the EIGRP Page—Setup Tab, page K-226.
Protocol to Redistribute The routing protocol that is being redistributed:
• Static—Redistributes static routes. You can define a single mapping for
each route.
• EIGRP—Redistributes an EIGRP autonomous system. Enter the AS
number in the displayed field. You can define a single mapping for each
AS.
• BGP—Redistributes a BGP autonomous system. You can define a single
BGP mapping on each device. If you configured a BGP AS in the BGP
Setup tab, the AS number is displayed. Otherwise, a message is
displayed indicating that no BGP AS was defined. See BGP
Page—Redistribution Tab, page K-223.