Filter
Top Products
K-47
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
SHDSL Policy Page
SHDSL Policy Page
Use the SHDSL page to create, edit, and delete DSL controller definitions on the
router. For more information, see Defining SHDSL Controllers, page 15-44.
Navigation Path
• (Device view) Select Interfaces > Settings > DSL > SHDSL from the Policy
selector.
DSL Operating Mode The operating mode configured for this ADSL line:
• auto—Performs automatic negotiation with the DSLAM located at the
central office (CO). This is the default.
• ansi-dmt—The line trains in ANSI T1.413 Issue 2 mode.
• itu-dmt—The line trains in G.992.1 mode.
• splitterless—The line trains in G.992.2 (G.Lite) mode.
• etsi—The line trains in ETSI (European Telecommunications Standards
Institute) mode.
• adsl2—The line trains in G.992.3 (adsl2)mode.
• adsl2+—The line trains in G.992.5 (adsl2+) mode.
Note See Table 15-3 on page 15-39 for a description of the operating
modes that are supported by each card type.
Use low tone set When selected, the interface card uses carrier tones 29 through 48.
When deselected, the interface card uses carrier tones 33 through 56.
Note Leave this option deselected when the interface card is operating in
accordance with Deutsche Telekom specification U-R2.
OK button Saves your changes locally on the client and closes the dialog box.
Note To save your changes to the Security Manager server so that they are
not lost when you log out or close your client, click Save on the
source page.
Table K-20 ADSL Settings Dialog Box (Continued)