Filter
Top Products
K-255
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
RIP Routing Policy Page
RIP Routing Policy Page
RIP is a distance-vector routing protocol that uses hop count as the metric for path
selection. Security Manager supports RIP version 2 only, which includes support
for neighbor authentication when routing updates are exchanged.
You can configure RIP routing policies from the following tabs on the RIP
Routing page:
• RIP Page—Setup Tab, page K-255
• RIP Page—Authentication Tab, page K-257
• RIP Page—Redistribution Tab, page K-260
For more information, see RIP Routing on Cisco IOS Routers, page 15-208.
Navigation Path
• (Device view) Select Platform > Routing > RIP from the Policy selector.
• (Policy view) Select Router Platform > Routing > RIP from the Policy Type
selector. Right-click RIP to create a policy, or select an existing policy from
the Shared Policy selector.
Related Topics
• Chapter K, “Router Platform User Interface Reference”
RIP Page—Setup Tab
Use the RIP Setup tab to create, edit, and delete RIP routes.
Navigation Path
Go to the RIP Routing Policy Page, page K-255, then click the Setup tab.
OK button Saves your changes locally on the client and closes the dialog box.
Note To save your changes to the Security Manager server so that they are
not lost when you log out or close your client, click Save on the
source page.
Table K-118 OSPF Max Prefix Mapping Dialog Box (Continued)