Cisco Systems OL-16066-01 Network Router User Manual


 
Appendix K Router Platform User Interface Reference
PPP/MLP Policy Page
K-76
User Guide for Cisco Security Manager 3.2
OL-16066-01
PPP/MLP Policy Page
Use the PPP/MLP page to create, edit, and delete PPP connections on the router.
For more information, see Defining PPP Connections, page 15-61.
Navigation Path
(Device view) Select Interfaces > Settings > PPP/MLP from the Policy
selector.
(Policy view) Select Router Interfaces > Settings > PPP/MLP from the
Policy Type selector. Right-click PPP/MLP to create a policy, or select an
existing policy from the Shared Policies selector.
Related Topics
PPP on Cisco IOS Routers, page 15-58
Chapter K, “Router Platform User Interface Reference”
Direction Applies only when CC management is enabled.
The direction in which CC cells are transmitted:
both—CC cells are transmitted in both directions.
sink—CC cells are transmitted toward the router that initiated the CC
activation request.
source—CC cells are transmitted away from the router that initiated the
CC activation request.
Keep VC up after
end-to-end failure
When selected, the PVC is kept in the up state when CC cells detect
connectivity failure.
When deselected, the PVC is brought down when CC cells detect
connectivity failure.
Keep VC up after
segment failure
When selected, specifies that if AIS/RDI cells are received, the PVC is not
brought down because of a segment CC failure.
When deselected, the PVC is brought down because of a segment CC failure.
Table K-32 PVC Advanced Settings Dialog Box—OAM-PVC Tab (Continued)