Filter
Top Products
Appendix K Router Platform User Interface Reference
Router Interfaces Page
K-20
User Guide for Cisco Security Manager 3.2
OL-16066-01
Subinterface ID Applies only to subinterfaces.
The ID number of the subinterface.
IP The source of the IP address for the interface:
• Static IP—Defines a static IP address and subnet mask for the interface.
Enter this information in the fields that appear below the option.
Note You can define the mask using either dotted decimal (for example,
255.255.255.255) or CIDR notation (/32). See Contiguous and
Discontiguous Network Masks, page 9-146.
• DHCP—The interface obtains its IP address dynamically from a DHCP
server.
• PPPoE—The router automatically negotiates its own registered IP
address from a central server (via PPP/IPCP). The following interface
types support PPPoE:
–
Async
–
Serial
–
High-Speed Serial Interface (HSSI)
–
Dialer
–
BRI, PRI (ISDN)
–
Virtual template
–
Multilink
• Unnumbered—The interface obtains its IP address from a different
interface on the device. Choose an interface from the Interface list. This
option can be used with point-to-point interfaces only.
Note Layer 2 interfaces do not support IP addresses. Deployment fails if
you define an IP address on a Layer 2 interface.
Table K-10 Create Router Interface Dialog Box (Continued)