Filter
Top Products
Appendix K Router Platform User Interface Reference
VTY Policy Page
K-136
User Guide for Cisco Security Manager 3.2
OL-16066-01
VTY Line Dialog Box—Authentication Tab
Use the Authentication tab of the VTY Line dialog box to define the
authentication methods to perform on users who attempt to access the selected
VTY line or group of lines.
Navigation Path
Go to the VTY Line Dialog Box, page K-131, then click the Authentication tab.
Related Topics
• Defining VTY Line AAA Settings, page 15-96
• VTY Line Dialog Box—Setup Tab, page K-132
• VTY Line Dialog Box—Authorization Tab, page K-137
• VTY Line Dialog Box—Accounting Tab, page K-139
• Console Page—Authentication Tab, page K-121
Field Reference
Table K-59 VTY Line Dialog Box—Authentication Tab
Element Description
Authenticate Using Authentication settings for the VTY line:
• None—Authentication is not performed. This is the default.
• Local Database—Uses the local username database for authentication.
• AAA Policy Default List—Uses the default authentication method list
that is defined in the device’s AAA policy. See AAA
Page—Authentication Tab, page K-88.
• Custom Method List—Uses the authentication methods specified in the
Prioritized Method List field.
Note If you select local authentication, preview the full configuration
before deployment to make sure that the aaa new-model command
is not configured by another policy (for example, by configuring a
method list in the AAA policy) or is already configured on the device
itself.